Vibrotek Logo

State of the art automatic condition diagnostic, monitoring, and balancing software

 

To Vast & Vibrotek Home

Back

eng | rus

VBal Balancing Systems

   Find

 

VBal Lite Balancing Application

 

VBalLit - low cost PC software developed for field balancing of a machine using up to 3 balancing planes and 8 measurement points. It is possible to balance a machine with or without removal of trial weights. VBalLit can provide reduction of balancing planes and machine runs.

The software is installed on a computer. Any instrument can be used to collect amplitude and phase data at machine running speed. Also, you may use a DC-21 or transducers of stationary/stand systems from VAST.

When VibroTek or VAST hardware is used to collect data, the tacho signal is monitored during measurements. The measurement process is stopped automatically when the required accuracy is obtained. Spectral components with differences of 0.01% can be identified.

 

The system automatically detects conditions that may decrease balancing efficiency:

  • Low reliability of the vibration measurement data

  • Too small trial weight

  • Linear dependence between balancing planes

 

All balancing steps are recorded in Balancing Report that is saved and and can be printed. On the left, you can see an example of such a report.

 

site map | e-mail

Copyright (c) 1996-2008 Vibrotek, Inc. All rights reserved.

Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries.