Vibrotek Logo

State of the art automatic condition diagnostic, monitoring, and balancing software

 

To Vast & Vibrotek Home

Back

eng | rus

DC-21 Data Collector

   Find

 

 

 DC-21 functional specifications include:

Input

Number of Channels

2 analog channels
1 syncronization channel

Input types

ICP or charge accelerometer (2 ch.)
Linear voltage (2 ch.)
Phase reference tacho (TTL)

Sensor types

accelerometer,
current clamps,
microphone,
tacho probe

Integration

analog (1 stage),
digital (1 or 1 stages)

Frequency range

0.1 - 25600 Hz

Frequency range (+0.5dB)

0.5 - 25600 Hz

Linear input signal range

+\- 3 V

Phase difference between channels

in 2..300 Hz 1 degree or less
in 301..1000Hz 5 degres or less

Between channel interference

- 100 dB or better

Gain

AUTO, 0-54 dB in 6 dB steps

Vibration parameters
Measured magnitudes displacement,
velocity,
acceleration,
peak-factor
Detector RMS, true peak, peak-peak
Frequency bands for vibration
ISO standard: 2..1000, 10..1000, 10..2000 Hz
additional: 2..200, 3..300, 5..500, 10..5000, 500..2500, 625..1250, 1200..2500, 2500..5000, 5000..10000, 10000..25000, 17000..25000 Hz
Vibration range acceleration (on 160 Hz) from 0.05 up to 1000 m/s2
velocity (on 80 Hz) from 0.1 up to 100 mm/s
displacement (on 40 Hz) from 1 up to 1000um

FFT spectra

Frequency span

25, 50, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 Hz

Frequency resolution

400, 800, 1600 lines

Dynamic range

90 dB or better

Linear averages

1-256

Weighting function

Hanning

Scale Type

Linear or logarythmic

Envelope detector
Band pass filters
with center frequencies

1/3 octave:

800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000,
6400, 8000, 10000, 12800, 16000, 20000 Hz

1/1 octave:

50, 100, 200, 400, 800, 1600, 3200, 6400, 8000, 12800, 16000 Hz

Time waveform 

Sampling frequencies

64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 Hz

Number of samples

200, 400, 1000, 2000, 4000

Envelope detector
Band pass filters
with center frequencies

1/3 octave:

800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000,
6400, 8000, 10000, 12800, 16000, 20000 Hz

1/1 octave:

50, 100, 200, 400, 800, 1600, 3200, 6400, 8000, 12800, 16000 Hz

Amplitude and Phase measurements

Frequency range

0.5-1700 Hz (30-102000 RPM)

RPM error

+ 1%

Phase measurement error

+ 5 degrees

Amplitude error

+ 1 dB

Automatic control

tacho signal parameters
reliability of measurements

Amplitude measurement units

G, m/s2, mm/s, mm, in/s2, in/s, mil
RMS, Peak, or Peak to Peak

Internal power supply for
phase reference tacho

5 V DC, 15 mA

Overall Measurements

Bands

2-1000 Hz, 10-1,000 Hz, 10-20,000 Hz, 10-5,000 Hz, 
5-10 kHz,10-25 kHz, 2-200 Hz, 5-500 Hz

Detector Type

RMS, Peak, Peak to Peak, Peak Factor

Scale Type

Linear or log

Units

g, m/s^2, mm/s, mm, V, in/s, mils  

RPM-amplitude-frequency measurements for run-up/coast-down

Rotation speed range

0.5-1700 Hz (30-102000 RPM)

Frequency range

from 0.5 Hz up to 10xRPM

RPM resolution

up to 200 lines on two harmonics

Measurements are done on

1-6th harmonics of rotation speed

General

Operation Temperature

-20 / +50C (5/ 120F)

Weight

0.9 kg

Dimensions

109(W) x 208(L) x 35(H) mm

Battery type

Nickel Metal Hydride

Operation time from batteries

10 hours with reserve battery

Battery full charge time

2 hours

Power management

Adjustable auto shut down
Adjustable auto backlight switch off

Data storage capacity

800 spectra

Interfaces

RS-232

site map | e-mail

Copyright (c) 1996-2008 Vibrotek, Inc. All rights reserved.

Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries.